Table of Contents
Advertisement
Wireless Access Point User Guide
Using 802.1x Mode (without WPA)
This is very similar to using WPA-802.1x.
The only difference is that on your client, you must NOT enable the setting The key is provided for me auto-
matically.
Instead, you must enter the WEP key manually, ensuring it matches the WEP key used on the Access Point.
Figure 52: Properties Screen
Note:
On some systems, the "64 bit" WEP key is shown as "40 bit" and the "128 bit" WEP key is shown as "104
bit". This difference arises because the key input by the user is 24 bits less than the key size used for en-
cryption.
68
Advertisement
Table of Contents
