Wireless Access Point User Guide
Checking TCP/IP Settings - Windows NT4.0
1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below.
Figure 68: Windows NT4.0 - TCP/IP
2. Click the Properties button to see a screen like the one below.
Figure 69: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Ad-
dress, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. This is the default Windows settings. To work correctly, you need a
DHCP server on your LAN.
94