Use VLAN
VLAN Configuration Screen
This screen is accessed via the Configure VLAN button on the Security Profiles screen.
•
The settings on this screen will be ignored unless the Use VLAN option on the Security Profiles screen is
selected.
•
If using the VLAN option, these setting determine which VLAN traffic is assigned to.
Data - VLAN Configuation Screen
Profile
Each profile is listed by name.
Enter the ID for the required VLAN. All traffic using this profile will
VLAN ID
be assigned to this VLAN.
VLAN - AP Traffic
No VLAN Tag
Traffic generated by this AP will not have a VLAN tag (no VLAN
ID).
This option is only useful if the hubs/switches on your LAN
support the VLAN (802.1Q) standard.
When VLAN is used, you must select the desired VLAN for
each security profile when configuring the profile. (If VLAN is
not selected, the VLAN setting for each profile is ignored.)
Click the Configure VLAN button to configure the IDs used by
each VLAN. See below for further details.
Figure 11: VLAN Configuration
19
Access Point Setup