Table of Contents
Advertisement
Wireless Access Point User Guide
Wireless Screens
There are two (2) configuration screens available:
•
Basic Settings
•
Advanced
Basic Settings Screen
The settings on this screen must match the settings used by Wireless Stations.
Click Basic on the menu to view a screen like the following.
Data - Basic Settings Screen
Operation
Wireless Mode
Figure 25: Basic Settings Screen
Select the desired option:
•
Disable 2.4GHz band - select this if for some reason you do
not this AP to transmit or receive at all.
•
802.11b and 802.11g - this is the default, and will allow
connections by both 802.11b and 802.1g wireless stations.
•
802.11b - if selected, only 802.11b connections are allowed.
802.11g wireless stations will only be able to connect if they
are fully backward-compatible with the 802.11b standard.
•
802.11g - only 802.11g connections are allowed. If you only
have 802.11g, selecting this option may provide a perform-
ance improvement over using the default setting.
•
Dynamic Super 802.11g (108Mbps) - This uses Packet
Bursting, FastFrame, Compression, and "Channel Bonding"
(using 2 channels) to increase thoughput. Only clients sup-
44
Advertisement
Table of Contents
