Security Settings - Wpa With Radius - LevelOne 108Mbps PoE User Manual

Security Settings - WPA with Radius

This version of WPA requires a Radius Server on your LAN to provide the client authentication according to
the 802.1x standard. Data transmissions are encrypted using the WPA standard.
Data - WPA with Radius Screen
WPA with Radius
Radius Server
Address
Radius Port
Client Login Name
Shared Key
WPA Encryption
Group Key Update
Figure 20: WPA with Radius Wireless Security Screen
Enter the name or IP address of the Radius Server on your
network.
Enter the port number used for connections to the Radius
Server.
This read - only field displays the current login name, which
is the same as the name of the Access Point. The Radius
Server must be configured to accept this login.
This is used for the Client Login on the Radius Server.
Enter the key value to match the Radius Server.
The encryption method is TKIP. Wireless Stations must
also use TKIP.
This refers to the key used for broadcast transmissions.
Enable this if you want the keys to be updated regularly.
33
Access Point Setup