Wireless Access Point User Guide
Internet Authentication Service (Radius) Setup
1. Select Start - Programs - Administrative Tools - Internet Authentication Service
2. Right-click on Clients, and select New Client.
3. Enter a name for the access point, click Next.
4. Enter the address or name of the Wireless Access Point, and set the shared secret, as entered on the
Security Settings of the Wireless Access Point.
5. Click Finish.
6. Right-click on Remote Access Policies, select New Remote Access Policy.
7. Assuming you are using EAP-TLS, name the policy eap-tls, and click Next.
8. Click Add...
If you don't want to set any restrictions and a condition is required, select Day-And-Time-Restrictions,
and click Add...
9. Click Permitted, then OK. Select Next.
10. Select Grant remote access permission. Click Next.
11. Click Edit Profile... and select the Authentication tab. Enable Extensible Authentication Protocol, and
select Smart Card or other Certificate. Deselect other authentication methods listed. Click OK.
Figure 39: Service Screen
Figure 40: Attribute Screen
60