Setup Procedure - LevelOne 108Mbps PoE User Manual

Setup Procedure

1. Select the desired Wireless Access Point.
2. Click the Set IP Address button.
3. If prompted, enter the user name and password. The default values are admin for the User Name, and
password for the Password.
4. Ensure the IP address, Network Mask, and Gateway are correct for your LAN. Save any changes.
5. Click the Web Management button to connect to the selected Wireless Access Point using your Web
Browser. If prompted, enter the User Name and Password again.
6. Check the following screens, and configure as necessary for your environment. Use the on-line help if
necessary.
The later sections in this Chapter also provide more details about each of these screens.
•
Access Control - MAC level access control.
•
Security Profiles - Wireless security.
•
System - Identification, location, and Network settings
•
Wireless - Basic & Advanced
7. You may also wish to set the admin password and administration connection options. These are on the
Admin Login screen accessed from the Management menu. See Chapter 6 for details of the screens
and features available on the Management menu.
8. Use the Apply/Restart button on the menu to apply your changes and restart the Wireless Access Point.
Setup is now complete.
Wireless stations must now be set to match the Wireless Access Point. See Chapter 4 for details.
11
Access Point Setup