Wireless Access Point User Guide
SNMP
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program on your PC. To
reach this screen, select SNMP in the Management section of the menu.
Data - SNMP Screen
General
Enable SNMP
Use this to enable or disable SNMP as required
Community
Enter the community string, usually either "Public" or "Private".
Select the desired option:
Access Rights
•
•
Managers
Any Station
The IP address of the manager station is not checked.
The IP address is checked, and must match the address you
Only this station
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Traps
Disable
Traps are not used.
Broadcast
Select this to have Traps broadcast on your network. This
makes them available to any PC.
Select this to have Trap messages sent to the specified PC
Send to
only. If selected, you must enter the IP Address of the desired
PC.
Trap version
Select the desired option, as supported by your SNMP Man-
agement program.
Figure 63: SNMP Screen
Read-only - Data can be read, but not changed.
Read/Write - Data can be read, and setting changed.
84