Kyocera TASKalfa 3501i Operation Manual page 471

Troubleshooting > Troubleshooting
Error
Code
Failed to send via FTP.
2102
2103
Failed to send the e-mail.
Failed to send i-FAX.
Failed to send the e-mail.
2201
Failed to send via FTP.
2202
Failed to send via SMB.
2203
Failed to send i-FAX.
2231
Failed to send the e-mail.
2204
Failed to send i-FAX.
Failed to send the e-mail.
3101
Failed to send i-FAX.
Failed to send via FTP.
Failed to send the e-mail.
3201
Failed to send i-FAX.
—
0007
4201
4701
5101
5102
5103
5104
7101
7102
7103
720f
—
9181
Message
Check the network and SMB settings.
•
•
•
Check the following of the FTP server.
•
•
Check the network and SMB settings.
•
•
•
Check the network and SMB settings.
•
•
•
Check the E-mail size limit of the SMTP settings on
the Command Center RX.
Check the authentication methods of both the sender
and the recipient.
Check the network and SMB settings.
•
•
•
Check the authentication methods of both the sender
and the recipient.
Turn the main power switch off and back on. If this
error occurs several times, make a note of the
displayed error code and contact your service
representative.
The scanned original exceeds the acceptable number
of pages of 999. Send the excess pages separately.
Corrective Actions
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Is FTP available?
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
10-35
Reference
Page
—
—
—
—
—
—
—
—
—
—