E-Mail Settings - Kyocera TASKalfa 3501i Operation Manual

Installing and Setting up the Machine > Command Center RX

E-mail settings

By configuring the SMTP settings, you can send E-mail notifications on completed jobs.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
In addition, check the following.
• The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.
• SMTP settings
Use Command Center RX to register the IP address or host name of the SMTP server.
• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1
Display the screen.
1
Access Command Center RX by referring to
2
From the [Function Settings] menu, click [E-mail].
1
2
Accessing Command Center RX on page
2-37
2-34.