Kyocera TASKalfa 3501i Operation Manual page 389

Setup and Registration (System Menu) > System Menu
Item
Panel Reset Timer
Sleep Timer
Interrupt Clear Timer
Error Job Skip
Error Clear Timer
1
Unusable Time*
Sleep Rules (models for
Europe)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Device Log History] is set to [On].
Set amount of time before entering Sleep.
Value:
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
NOTE
This function is displayed when [Auto Sleep] is set to [On].
Set the period after which the machine reverts to Normal mode when it has been set to
Interrupt Copy mode and then left unused.
Value: 5 to 495 seconds (in 5 second increments)
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error
occurred when the job was started is automatically skipped after a set period of time elapses.
Value: Off, On
NOTE
• When a job is skipped, it is moved to the end of the job queue.
• If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90
(5 second increments).
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
For details, refer to the FAX Operation Guide.
Select whether to use the Sleep mode for the following functions individually:
• Network
• USB Cable
2
• Card Reader*
1
• FAX*
• Application
Value: Off, On
NOTE
If the sleep condition is not turned off, the machine will not wake from sleep mode even if it receives
a print job from a computer connected by USB cable. Also, the ID card cannot be recognized.
8-55
Description