Kyocera TASKalfa 3501i Operation Manual page 467

Troubleshooting > Troubleshooting
T
Message
The cover is open.
The folding unit is open.
The password does not
meet password policy.
The print system
connected to the current
port is not supported by
the printer driver.
Use a printer driver for
this port that matches
the print system.
The removable memory
is not formatted.
The slit glass requires
cleaning.
This user account is
locked out.
Toner is empty.
Toner is low. (Replace
when empty.)
Tray # is full of paper.
U
Message
Unknown toner installed.
Unknown Toner
Installed. PC
Checkpoints
Is there any cover which is open?
—
Is the password expired?
Is the password policy requirement
(such as password length or
required characters) changed?
Is the printer driver for this product
used?
Is the removable memory formatted
by this machine?
—
—
—
—
Is the acceptable storage capacity
exceeded?
Is the paper curled?
Checkpoints
Is the installed toner container our
own brand?
Does the installed toner container's
regional specification match the
machine's?
10-31
Corrective Actions
Close the cover indicated on the
screen.
Close the folding unit.
Change the login password.
The job is canceled. Press [End].
Confirm the password policy
requirements and change the login
password.
The job is canceled. Press [End].
Check the product name of the
machine and reinstall the printer
driver.
Perform [Format] on this machine.
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
Contact administrator.
The job is canceled. Press [End].
Replace the toner container to our
specified toner container.
It is almost time to replace the toner
container. Obtain a new toner
container.
Remove the paper. Printing then
resumes.
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.
Corrective Actions
We will not be liable for any damage
caused by the use of third party
supplies in this machine.
Install the specified container.
Reference
Page
―
—
page 9-7
page 9-8
page 9-7
page 9-8
—
―
page 10-3
―
page 10-6
—
—
page 10-20
Reference
Page
—
—