Lan Cable Connection - JVC LST0819-001A Instructions Manual

Using PoE
Supply power to the camera by connecting it to a
device that supports PoE via a LAN cable.
What is PoE (Power over Ethernet)?
PoE is a feature that transfers data and
supplies power simultaneously through a LAN
cable. It enables you to operate a LAN-
compatible equipment without having to
connect it to a power supply using a power
cord.
Cable to use
● Shield (STP) cable
● Length of 100 m or shorter
● Make use of a Category 5 (or higher) cable .
Note:
● When power is supplied to VN-V686WPBU using
PoE, the heater will not work. Use an AC 24 V
power supply when using the camera in an
environment under -10I.

LAN Cable Connection

Connect the camera to a hub or computer using
a LAN cable.
Cable to use
● Shield (STP) cable
● Length of 100 m or shorter
● Make use of a Category 5 (or higher) cable .
When connecting to a hub
Make use of a straight cable.
When connecting to a computer
Make use of a cross cable.
Note:
RJ-45
● However, cross cables cannot be used with
conversion
connector some computer models. When connecting
(provided)
the camera directly to a computer, check the
computer's LAN specifications in advance.
RJ-45
conversion
connector
(provided)