JVC LST0819-001A Instructions Manual page 59

A
Action For specifying the type of action.
Disable : Does not trigger any action.
Mail : Sends out e-mail. Specify the recipient's mail address. The
title of the mail will appear as [Alarm from VN-V685(VN-
V685U)][Alarm from VN-V686(VN-V686BU/VN-
V686WPBU)] and the sender as [Camera ID]. Enter the
message to send in [Mail Text]. Input up to 127
alphanumeric characters. To attach the latest image to the
mail, set [Attach Image] to On .
PrePostRecording + FTP
: Sends out pre-/post-recorded JPEG files via FTP. See the
page on Alarm Environment for details on pre-/post-
recording and FTP server settings. (A Page 62)
The maximum transmission rate of FTP is 1 Mbps. If a new
FTP trigger occurs during post-recording, the recorded
portion is treated as pre-recording and a new post-
recording starts. During FTP transmission after completing
the post-recording, a new post-recording starts if a new
FTP trigger occurs.
TCP : Sends out the character string entered in the [TCP/UDP
Data] field to the destinations specified in [TCP/UDP IP
Address] and [TCP/UDP Port Number] via TCP.
UDP : Sends out the character string entered in the [TCP/UDP
Data] field to the destinations specified in [TCP/UDP IP
Address] and [TCP/UDP Port Number] via UDP.
TCP/UDP Data
:Input up to 127 alphanumeric characters.
PinOutout 1 Make
PinOutout 1 Breake :Changes Alarm Output 1 to Break.
PinOutout 2 Make
PinOutout 2 Breake :Changes Alarm Output 2 to Break. Set the alarm
Position : This item moves the camera to the position set in [Action
Position No.] E.
BlackWhite → Color
: Changes the [B/W Mode] setting from Black & White to
Color .
Color → BlackWhite
: Changes the [B/W Mode] setting from Color to Black &
White .
DayNight:Auto Low
: Changes the [B/W Mode] setting to Auto Low .
DayNight:Auto Mid
: Changes the [B/W Mode] setting to Auto Mid .
DayNight:Auto High
: Changes the [B/W Mode] setting to Auto High .
:
Memo
● For details on [B/W Mode], see [B/W Mode] (A Page 55).
:Changes Alarm Output 1 to Make.
:Changes Alarm Output 2 to Make.
output time in the [Alarm Output Duration] field.