Camera Page - JVC LST0819-001A Instructions Manual

Camera Page

This page is for setting the camera's parameters.
This page can be used during access using admin or operator .
● Click [Advanced Settings] to display setting menu.
● Click [Camera]. Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● To restore the settings of this page to the factory settings, press [Initialize] button.
Click
A
Camera ID
B
Monitor Type
C
Black Level
Character strings entered here will be written to the JPEG comment segment
(item name: Camera ). Refer to the [API Guide] (provided CD-ROM) on the
file formats of JPEG.
For selecting the monitor type according to the monitor used to display the
video images. The picture quality varies according to the type of monitor
selected.
Custom : Enables setting of picture quality according to the user's
preference.
LCD1, LCD2 : Picture quality setting for LCD monitors. Two types are
available for selection according to the user's preference.
CRT : Picture quality setting for CRT (cathode-ray tube) monitors.
[Setting value:Custom, LCD1, LCD2, CRT]
For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.
[Setting range:0 to 2]
:
Memo
● If the black level is set to 0 , this may be too low depending on the
connected device, or dark area will become complete black.
● When using MPEG4 images, set to either 1 or 2 .
A
B
C
D
E
F
G
H
I
J
K
L
M