JVC LST0819-001A Instructions Manual page 39

4
If ActiveX controls and plug-ins of the Internet Explorer is disabled, follow the steps
below to enable it
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Select the [Custom Level] button
and open the [Security Settings] window. Set all items under [ActiveX controls and plug-ins] in
the opened window to [Enable]. Enable also [Use the following IP address] under
[Miscellaneous].
5
Disable pop-up block
Connection of the camera cannot be established when pop-up block in the Internet Explorer is set to
Enable .
Follow the steps below to set the pop-up block to disable .
● Selecting [Tool]-[Pop-up Blocker]-[Turn Off Pop-up Blocker] permits all sites.
● To allow only specific sites such as this unit, select [Tool]-[Pop-up Blocker]-[Turn On Pop-up
Blocker], followed by selecting [Tool]-[Pop-up Blocker]-[Pop-up Blocker Settings] that becomes
active to open the [Pop-up Blocker Settings] window.
In the opened window, add the address of VN-V686BU as a permitted web site address.
6
If plug-in tools are installed in the Internet Explorer, disable the pop-up block
function of these plug-in tools as well.
Select [Enable]