Cable Connection - JVC TK-C205VP Installation Precautions

Hide thumbs Also See for TK-C205VP:

Available languages

English

Fall prevention

• The ceiling to mount the camera has to be strong enough to support the weight of this

product.

If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling

before installation.

• Be sure to tighten the screws or nuts securely, Insufficient tightening may cause the

unit to fall from its mount.

• To avoid unforeseen accidents, attach the safety cable. Otherwise, there is nothing to

prevent the camera from falling should it come loose.

8 mm

2 mm

Pipe

Safety cable

Cable connection

Power Supply cable

Seal tape

12mm (

or less

Coaxial cable

Attachment screws

Use screw size suitable for the mounting

holes (ø5 mm (

Connecting the safety cable

• To prevent dropping, connect the unit to a

sturdy location (ceiling slab or channel)

and safety cable.

• For the used safety cable, pay particular

caution to the length, strength, pull, mate-

rial (insulation), etc.

• Always use the M4 screws mounted on

the unit.

Do not cross the power supply cable and

coaxial cable.

")).