Ptz Page - JVC LST0819-001A Instructions Manual

Setting Using Internet Explorer
Setting (continued)

PTZ Page

This page is used for specifying Auto Return, Auto Tracking, Intelligent Tracking, Move Preset Position,
and Auto Flip.
This page can be used during access using admin or operator .
● Click [Advanced Settings] to display setting menu.
● Click [PTZ]. Press the [OK] button to enable the new settings. Press the [OK] button to enable the
new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Click
A
Auto Return
Mode
If the camera is not operated over the duration that was set in Return
Time , it will automatically return to the state that was set in Mode .
This item sets the operation after Auto Return.
none : Auto Return is disabled.
Home : Returns to the home position.
Auto Pan : Returns to the Auto Pan operation.
Auto Patrol : Returns to the Auto Patrol operation.
Auto Trace : Returns to the Auto Trace operation.
Auto Tracking : Returns to the automatic tracking operation.
Intelligent Tracking : Returns to the Intelligent Tracking operation.
A
B
C
D
E
F