JVC LST0819-001A Instructions Manual page 68

Setting Using Internet Explorer
Setting (continued)
PTZ Page (continued)
B
Auto Tracking/
Intelligent
Tracking
(continued)
Restart Time
Auto Tracking
Level
:
Memo
● Intelligent tracking cannot begin under the following conditions.
● [B/W Mode] is set to Black & White (A Page 55)
● [B/W Mode] is set to Auto and black and white is selected
(A Page 55)
● [Auto Flip] is set to Digital Flip (A Page 71)
● All areas of detected motion are masked (A Page 76)
● The zoom ratio exceeds 20x. (The zoom ratio of the home position
exceeds 20x if Intelligent Tracking is started by Auto Return.)
● Dark images can be improved with the [Sense Up] (A Page 54) function
but the tracking may be slow.
Note:
● The Auto Tracking function of this camera detects changes in brightness.
As such, depending on changes in the illumination, it may or may not
detect movement of objects having the same color as the background
color. It may be difficult to detect objects with very slow movement. Check
the operating conditions thoroughly beforehand and configure the
settings such that there will not be any misoperation or omission of
detection.
● When [Stabilizer] (A Page 53) is set to OFF , this function starts from
home position and initial detect area is the screen of the home position
without enlargement. When [Stabilizer] is set to ON , as the screen is
enlarged, it will also respond to motion of image which is not shown on
the screen. This is the specification of this unit, not a malfunction.
Auto Tracking : This item sets the duration to return to the home position
when there is no movement in the images after auto
tracking starts.
Intelligent Tracking
: When Intelligent Tracking loses the object, you can return
to the home position after the preset [Restart Time] has
elapsed.
For Intelligent Tracking, the camera does not return to
home position while the object is locked even if the object
does not move.
[Setting value:Off, 10seconds, 20seconds, 30seconds, 40seconds,
50seconds, 60seconds, 120seconds]
Note:
● When the [Mode] item of [Auto Return]A is set to Auto Tracking and
the [Return Time] is set shorter than the [Restart Time] for [Auto
Tracking]B, the camera will operate according to the [Return Time].
This item sets the detection sensitivity of Auto Tracking/Intelligent Tracking.
To lower the sensitivity B Decrease the number
To increase the sensitivity B Increase the number
[Setting range:0 to 10]