Image Quality Setting - JVC LST0819-001A Instructions Manual

Operation
Built-in Viewer (continued)

Image quality setting

Image Settings
For adjusting the picture quality.
● When a different menu is currently being displayed, click [Control] to switch the menu.
● Click each menu bar on the left of the screen to open the setting screen.
Click
A
B
C
D
A
White Balance
Mode
R Gain
For selecting the white balance control feature.
ATW-Wide : This is the Auto-Tracking White Balance mode (Automatic color
temperature tracking). The camera adjusts the white balance
automatically according to the color temperature of the illumination.
(Color temperature range of 2,300K to 10,000K)
ATW-Narrow : This mode supports a narrower range of color temperature than
ATW-Wide.(Color temperature range of 3,200K to 8,000K)
ATW-Full : ATW is performed in a wider color temperature range.
ATW-Sodium : Under the light of a high-pressure sodium lamp, the color is closer to
the actual one.
AWC : Switches to the Auto-White Balance Control mode. In the AWC
mode, values entered for the [R Gain] and [B Gain] items are applied
to white balance.
Adjusts the R (red) hue during AWC.
[+] : Increases the redness or red level.
[-] : Decreases the redness or red level.
:
Memo
● Click the [+] or [-] button once to change to the next value. To change the value
continuously, click repeatedly. The value will not change if the button remains pressed
down.