JVC LST0819-001A Instructions Manual page 29

3
Connecting the alarm cable (A
Page 25)
Connect the alarm cable and wind the
waterproof tape (adhesive).
After connecting, push the cable into the arm of
the camera.
Wind the waterproof tape
(adhesive)
Note:
● For cables that are not used, be sure to wrap
the ends individually with insulating tape.
● For safety reasons, turn on the power only
after all the connection is complete.
Arm
4
Mount the cap
5
Seal the cable connection hole and
around the mounting surface of the
camera with waterproof seal (GE
silicon).
4
Cap
5
Waterproof
treatment
Note:
● Ensure that waterproof treatment is
performed. Otherwise, the camera may
malfunction due to rain water seepage.
● Use GE silicon or other similar product for the
sealing material.
6
Remove the dome cover protective
sheet
Protective
sheet