JVC LST0819-001A Instructions Manual page 60

Setting (continued)
Alarm Page (continued)
B
1st Trigger
C
Max. Interval
D
2nd Trigger
E
Action Position
No.
F
Trigger Position
No.
G
Mail
This item specifies the first trigger to the operation set in [Action] A.
[Setting value:Input 1 Make, Input 2 Make, Input 1 Break, Input 2 Break,
Motion Detection, Fan Stop, Position, BlackWhite → Color, Color →
BlackWhite]
:
Memo
● When the second trigger is turned off, the action will be invoked only by
the first trigger.
● When Motion Detection , Fan Stop , Position , BlackWhite→Color ,
Color → BlackWhite is selected as the first trigger, selection of Max.
Interval and 2nd Trigger will be disabled.
Enabled when both the first and second triggers are specified.
Specify the maximum interval between the first and second triggers. An
action will be invoked only if the interval between the first and second
triggers is within the maximum interval.
[Setting range:1sec to 3600sec]
This item specifies the second trigger to the operation set in [Action] A.
[Setting value:Off, Input 1 Make, Input 2 Make, Input 1 Break,
Input 2 Break]
This item sets the position number for trigger when Position is selected in
[Action] A.
[Setting range:0 to 99]
This item sets the position number for trigger when Position is selected in
[1st Trigger] B.
[Setting range:0 to 99]
Mail Address : For entering the recipient's mail address.
Mail Text : For entering the mail transmission data. Input up to 127
Attach Image : For specifying whether to attach images to the mail.
alphanumeric characters.