Admin User Id/Password Or Guest Password Change - Digimerge DHT304 Installation & User Manual

ADMIN USER ID/PASSWORD OR GUEST PASSWORD CHANGE

PROCEDURE
Click on the Setup icon to open the setup window.
Note: you must be connected to the DVR to change the password
The change password message window will appear
To change the guest password, repeat the procedure above by pressing the guest icon.
Click on the admin icon
•
Enter the current password
•
Enter the ID of the admin user (Max. 5digits)
•
Enter new the password for the admin user
•
Verify the new password of the admin user.
•
Click OK to finish
•
Enter the password for the guest user
•
Verify the password of the guest user.
•
Press OK to finish.
•
A change password message window will appear
.
54
.