Save/Restore Configuration - Vololink VoloAccess User Manual

VoloAccess™

Save/Restore Configuration

It is good practice to save the VoloAccess configuration to a file so that it can be restored at a later date if
it becomes necessary to recover from a configuration error. To save the configuration, proceed as follows:
●
Select System followed by Save/Restore in the Navigation panel - the Save/Restore page appears:
●
Click the Save Configuration button.
A confirmation dialog appears. Click the Save button.
The Save As dialog appears.
●
Select a location to save the backup configuration file.
●
Click the Save button to complete the task.
A Download Complete dialog appears – click Close.
●
To Restore a saved configuration:
●
Under the heading Restore Configuration click the Browse button - a dialog opens for you to locate
and select the previously saved backup configuration file.
●
Click the Restore Configuration button.
Do not attempt to cancel or interrupt this operation.
After the upload has completed it is necessary to
to take effect.
Copyright © Vololink Pty Ltd 2006-2010
restart the VoloAccess for the restored configuration
V1.43 July 2010
User Manual
Page 53 of 78