Admin; Apn (Access Point Name); The Test Button - Vololink VoloAccess User Manual

VoloAccess™

Admin

This section covers the administration of the VoloAccess. There are many configurable features; however, if
your VoloAccess was purchased as a packaged unit
configure any settings to make your VoloAccess work.

APN (Access Point Name)

If your VoloAccess was purchased as a packaged unit including a configured SIM, you do not need to
configure the APN
It is recommended that even if you have a pre-configured unit, you complete the next step and record
the APN. This is to save time obtaining it from your service provider in the event it is lost due to a
configuration error or a reset sometime in the future.
What is the APN? – The APN is the name of your 3G services provider‟s wireless access point.
To configure the APN for your 3G services provider, start by loading
●
From the Navigation panel on the left select Quick Setup - the Quick Setup page appears:
●
Enter your 3G services provider‟s APN in the editbox provided.
●
Click the Apply button.

The Test Button

On many of the configuration pages a Test button is present. Use the Test button to test the functionality
that you have just configured. When you are satisfied with the new configuration, click the Apply button.
Clicking the Apply button saves any changed settings permanently in non-volatile memory.
The rest of this section covers items that you may wish to view or change.
Copyright © Vololink Pty Ltd 2006-2010
(Access Point Name).
including a configured
Admin
V1.43 July 2010
User Manual
SIM, it is not necessary to
as described above.
Page 16 of 78