Updating The Voloaccess Firmware - Vololink VoloAccess User Manual

VoloAccess™

Updating the VoloAccess Firmware

From time to time it may be necessary to update the VoloAccess firmware. To obtain updated firmware
please contact your VoloAccess supplier then proceed as follows:
If you are updating the firmware on a WiFi enabled VoloAccess, connect the VoloAccess to the
computer using the supplied Ethernet cable.
From the navigation panel select System followed by Firmware – the Firmware page appears:
●
●
Click the Browse button to locate the Firmware Update file - a browse box opens.
●
Select the Firmware Update file.
●
Click the Open button to select the update.
●
Click the Update Firmware button to start the process.
The Firmware update will take between 3 and 8 minutes to complete.
Make sure that you click „Update Firmware‟ only once.
Do not attempt to cancel or interrupt the firmware update.
Do not navigate away from the Firmware Update page until complete.
When the update is complete the VoloAccess will reboot automatically and the Firmware Update
Complete page will appear.
The VoloAccess will restart automatically and display the VoloAccess Index page.
Copyright © Vololink Pty Ltd 2006-2010 V1.43 July 2010
User Manual
Page 52 of 78