Cancelling A Command; Command Success/Failure Indication - Vololink VoloAccess User Manual

VoloAccess™
Call Barring continued...
Bar All Outgoing Calls
Bar All Outgoing Calls
Bar All Outgoing International Calls
Bar All Outgoing International Calls
Bar All Outgoing International Calls except to Home
Country enable
Bar All Outgoing International Calls except to Home
Country disable
All Outgoing Call Barring
The next section refers to In Call features. These commands are executed while a call is in progress.
Answer a Call in Waiting
Multiparty Call – A call is in progress and there is another
incoming call
Multiparty Call – A call is in progress and you make another
call

Cancelling a Command

For all commands except the In-Call Feature commands, hanging up the telephone handset or pressing
the Cancel button in Admin will cancel it.

Command Success/Failure Indication

For a command entered using the keypad, you will hear a high pitched beeping (higher than the dial
tone pitch) to indicate success. A low pitched beeping (similar to the dial tone pitch) indicates failure.
Copyright © Vololink Pty Ltd 2006-2010
enable
disable
enable
disable
disable
Feature
*33*<password>Flash
#33*<password>Flash
*331*<password>Flash
#331*<password>Flash
*332*<password>Flash
#332*<password>Flash
#333*<password>Flash
Keypad sequence
Flash2#
Alternates between the calls
Flash2# to put current call on hold
and pick up the incoming call; then,
Flash3# to connect all calls
Flash2# to put current call on hold,
make another call by
Flash[number]*,
when call is answered,
Flash3# to connect all calls
V1.43 July 2010
User Manual
Page 48 of 78