Pbc Method - Vololink VoloAccess User Manual

VoloAccess™
●
During negotiation the WPS page changes to reflect the WPS Active state and the WPS indicator on
the VoloAccess flashes.
●
After WPS negotiation has completed, verify the connection by selecting LAN > View Leases in
Admin.

PBC Method

●
On the client computer, run the Setup program supplied with the WPS-capable device. This usually
involves inserting the supplied CD into the computer‟s DVD/CD drive and allowing it to run
automatically. If this is not the case, refer to the user manual supplied with the WPS-capable device
on how to install the software.
●
The Setup program should take you through the steps required to connect to a WPS-capable Access
Point, in this case, the VoloAccess.
●
If an option for PIN or PBC method of connection is offered, select PBC.
●
Continue by following the steps offered by the Setup program.
●
If prompted by the Setup program to initiate WPS on the Access Point, press the WPS
button (shown here) on the VoloAccess or, click the Start button in the WPS page of
Admin.
●
During negotiation the WPS page changes to reflect the WPS Active state and the WPS indicator on
the VoloAccess flashes.
●
After WPS negotiation has completed, verify the connection by selecting LAN > View Leases in
Admin.
You can still connect non-WPS-capable wireless clients using the process described in the next
section.
Copyright © Vololink Pty Ltd 2006-2010 V1.43 July 2010
User Manual
Page 39 of 78