Configuring Wireless Networking On Your Computer - Vololink VoloAccess User Manual

VoloAccess™

Configuring Wireless Networking on your computer

Windows XP
●
Click Start, then Control Panel.
●
Double-click Network Connections.
●
Locate your WiFi adapter in the list. Right-click this and select View Wireless Networks.
●
Select the network name (SSID) that you defined when setting up WiFi on the VoloAccess and click
Connect.
●
If security is configured on the VoloAccess, a dialog box is displayed requesting a Network key.
●
Type in the same pre-shared key that was entered when setting up WiFi on the VoloAccess. Re-enter
the key as confirmation then click Connect.
●
After a delay of approximately 5 to 10 seconds the message Connected should display in the dialog
box and an icon (
●
Open your web browser; you should be online and able to access the Internet.
Copyright © Vololink Pty Ltd 2006-2010
) is displayed in the Windows XP notification area.
V1.43 July 2010
User Manual
Page 40 of 78