Time And Date Management; How To Check/Adjust The Machine Time And Date - Neopost IS-420 User Manual

Time and Date Management

8.12 Time and Date Management

Daylight Savings Time Transitions
Your Mailing System normally auto-adjusts to Daylight Savings Time. However, if a
manual adjustment is necessary, you can use either of the following procedures to
correct the Mailing System time:
As a user:
•
As supervisor:
•
Time and Date Setup
Time and date are required for postage and are provided by the postal authorities. As
a result, you cannot manually adjust the system time and date.
However, you can ask the system to check the current time and date and display
them.
8
See also
[Date Correction] Mode (if available)
•
Automatic Date Advance
•

How to Check/Adjust the Machine Time and Date

How to Check/
Adjust the
Machine Time
and Date
150
How to Unlock the PSD
How to Check/Adjust the Machine Time and Date
p.143.
To check the time and date, make sure the connection to the
Postal Services is available. See
Services Connection
To check/adjust the current time and date:
1
As supervisor (see
Press
> System settings > Date and time
If you are processing postage at the time when the system clock
adjusts for daylight savings time, the Mailing System will wait until
you are finished before displaying the new time.
2
Select Audit call to adjust the time.
The system adjusts its time if necessary and displays time
and date values.
p.81
p.49.
How to Set the Postal/Online
p.148.
How to Log in as Supervisor
and type 6.4 or select the path:
.
p.126):