Advanced Phone Connectivity - Jeep Grand Cherokee WK2 Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 84 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 49554DB8
/chry_pdm/chrysler/owners/grc/og
you will not hear it. Under this situation,
after successfully dialing a number the user
may feel that the call did not go through
even though the call is in progress. Once
your call is answered, you will hear the
audio.
Mute/Un-Mute (Mute Off)
When you mute the Uconnect™ Phone, you will
still be able to hear the conversation coming
from the other party, but the other party will not
be able to hear you. In order to mute the
Uconnect™ Phone:
• Press the
• Following the beep, say "Mute".
In order to un-mute the Uconnect™ Phone:
• Press the
• Following the beep, say "Mute off".

Advanced Phone Connectivity

Transfer Call to and from Mobile Phone
The Uconnect™ Phone allows ongoing calls to
be transferred from your mobile phone to the
Uconnect™ Phone without terminating the call.
82
To transfer an ongoing call from your
Uconnect™ Phone paired mobile phone to the
Uconnect™ Phone or vice versa, press the
Connect or Disconnect Link Between the
Uconnect™ Phone and Mobile Phone
Your mobile phone can be paired with many
different electronic devices, but can only be
actively connected with one electronic device
at a time.
If you would like to connect or disconnect the
Bluetooth connection between a Uconnect™
button.
Phone
Uconnect™ Phone, follow the instructions de-
scribed in your mobile phone User's Manual.
List Paired Mobile Phone Names
button.
• Press the
• After the "Ready" prompt and the following
• When prompted, say "List Phones".
• The Uconnect™ Phone will play the phone
button and say "Transfer Call".
paired mobile phone
button to begin.
beep, say "Setup Phone Pairing".
names of all paired mobile phones in order
from the highest to the lowest priority. To
"select" or "delete" a paired phone being
announced, press the
"Select" or "Delete". Also, see the next two
sections for an alternate way to "select" or
"delete" a paired phone.
Select Another Mobile Phone
This feature allows you to select and start using
another phone paired with the Uconnect™
Phone.
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Setup Select Phone" and follow
and the
the prompts.
• You can also press the
time while the list is being played, and then
choose the phone that you wish to select.
• The selected phone will be used for the next
phone call. If the selected phone is not
available, the Uconnect™ Phone will return
to using the highest priority phone present in
or near (approximately within 30 ft [9 m]) the
vehicle.
button and say
button at any