Advanced Phone Connectivity - Jeep Cherokee Operating Information Manual

Uconnect™ Phone will not repeat a phone
number before you dial it).
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say:
− "Setup Confirmations Prompts On"
− "Setup Confirmations Prompts Off"
Phone And Network Status Indicators
If available on the radio and/or on a premium
display such as the instrument panel cluster,
and supported by your mobile phone, the
Uconnect™ Phone will provide notification to
inform you of your phone and network status
when you are attempting to make a phone call
using Uconnect™ Phone. The status is given
for network signal strength, phone battery
strength, etc.
Dialing Using The Mobile Phone Keypad
You can dial a phone number with your mobile
phone keypad and still use the Uconnect™
Phone (while dialing via the mobile phone
keypad, the user must exercise caution and
take precautionary safety measures). By dial-
ing a number with your paired Bluetooth mo-
68
bile phone, the audio will be played through
your vehicle's audio system. The Uconnect™
Phone will work the same as if you dialed the
number using a Voice Command.
NOTE:
Certain brands of mobile phones do not
send the dial ring to the Uconnect™ Phone
to play it on the vehicle audio system, so
you will not hear it. Under this situation,
after successfully dialing a number the user
may feel that the call did not go through
even though the call is in progress. Once
your call is answered, you will hear the
audio.
Mute/Un-Mute (Mute Off)
When you mute the Uconnect™ Phone, you will
still be able to hear the conversation coming
from the other party, but the other party will not
be able to hear you. In order to mute the
Uconnect™ Phone:
• Press the
button.
• Following the beep, say "Mute".
In order to un-mute the Uconnect™ Phone:
• Press the
button.
• Following the beep, say "Mute off".

Advanced Phone Connectivity

Transfer Call To And From Mobile Phone
The Uconnect™ Phone allows ongoing calls to
be transferred from your mobile phone to the
Uconnect™ Phone without terminating the call.
To transfer an ongoing call from your
Uconnect™ Phone paired mobile phone to the
Uconnect™ Phone or vice versa, press the
button and say "Transfer Call".
Connect Or Disconnect Link Between The
Uconnect™ Phone And Mobile Phone
Your mobile phone can be paired with many
different electronic devices, but can only be
actively connected with one electronic device
at a time.
If you would like to connect or disconnect the
Bluetooth connection, your mobile phone, and
the Uconnect™ phone system, follow the in-
structions described in your mobile phone Us-
er's Manual.
List Paired Mobile Phone Names
• Press the
button to begin.