To Activate; To Set A Desired Acc Speed; To Cancel - Jeep Grand Cherokee WK2 Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 121 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 2ACF6E55
/chry_pdm/chrysler/owners/grc/og
• When pushing the RES + button without a
previously set speed in memory.

To Activate

Push and release the ON/OFF button. The ACC
menu in the EVIC displays "Adaptive Cruise
Ready."
art=032433097.tif NO TRANS
Adaptive Cruise Control Ready
To turn the system OFF, push and release the
ON/OFF button again. At this time, the system
will turn off and the EVIC will display "Adaptive
Cruise Control Off."
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous. You
could accidentally set the system or cause it
to go faster than you want. You could lose
control and have a collision. Always leave the
system off when you are not using it.

To Set a Desired ACC Speed

When the vehicle reaches the speed desired,
push the SET - button and release. The EVIC
will display the set speed.
art=032435493.tif NO TRANS
ACC Set
Remove your foot from the accelerator pedal. If
you do not, the vehicle may continue to accel-
erate beyond the set speed. If this occurs:
• The message "DRIVER OVERRIDE" will dis-
play in the EVIC.
• The system will not be controlling the dis-
tance between your vehicle and the vehicle
ahead. The vehicle speed will only be deter-
mined by the position of the accelerator
pedal.
art=032435494.tif NO TRANS
Driver Override

To Cancel

The system will disable ACC without erasing
the memory if:
119