Onboard Diagnostic System - Obd Ii; Loose Fuel Filler Cap Message; Replacement Parts; Maintenance Procedures - Jeep Grand Cherokee WK2 Owner's Manual

Table of Contents

Advertisement

JOBNAME: CHRY OM INTL (Conten PAGE: 275 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 62F64EC7
/chry_pdm/chrysler/owners/grc/og
ONBOARD DIAGNOSTIC SYSTEM –
OBD II
Your vehicle is equipped with a sophisticated
onboard diagnostic system called OBD II. This
system monitors the performance of the emis-
sions, engine, and automatic transmission con-
trol systems. When these systems are operat-
ing properly, your vehicle will provide excellent
performance and fuel economy, as well as
engine emissions well within current govern-
ment regulations.
If any of these systems require service, the
OBD II system will turn on the "Malfunction
Indicator Light" (MIL). It will also store diagnos-
tic codes and other information to assist your
service technician in making repairs. Although
your vehicle will usually be drivable and not
need towing, see your authorized dealer for
service as soon as possible.
CAUTION!
• Prolonged driving with the MIL on could
cause further damage to the emission con-
trol system. It could also affect fuel
economy and drivability. The vehicle must
be serviced before any emissions tests can
be performed.
• If the MIL is flashing while the engine is
running, severe catalytic converter damage
and power loss will soon occur. Immediate
service is required.

Loose Fuel Filler Cap Message

art=041007754.tif
NO TRANS
If the vehicle diagnostic system
determines that the fuel filler cap is
loose, improperly installed, or
damaged, a loose gascap indica-
tor will display in the EVIC telltale
display area. Refer to "Electronic
Vehicle Information Center (EVIC)" in "Under-
standing Your Instrument Panel" for further in-
formation. Tighten the fuel filler cap properly
and press the SELECT button to turn off the
message. If the problem continues, the mes-
sage will appear the next time the vehicle is
started.
A loose, improperly installed, or damaged fuel
filler cap may also turn on the Malfunction
Indicator Light (MIL).

REPLACEMENT PARTS

Use of genuine MOPAR
parts for normal/
scheduled maintenance and repairs is highly
recommended to ensure the designed perfor-
mance. Damage or failures caused by the use
of non-MOPAR
parts for maintenance and
repairs will not be covered by the manufactur-
er's warranty.

MAINTENANCE PROCEDURES

The pages that follow contain the required
maintenance services determined by the engi-
neers who designed your vehicle.
Besides those maintenance items specified in
the fixed maintenance schedule, there are
other components which may require servicing
or replacement in the future.
273

Advertisement

Table of Contents
loading

Table of Contents