Play Mode; List Or Browse Mode - Jeep Grand Cherokee WK2 Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 184 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 42C5A49B
/chry_pdm/chrysler/owners/grc/og
device, either press the "AUX" button on the
radio faceplate or press VR button and say
USB or Switch to USB . Once in the UCI
mode, audio tracks (if available from audio
device) start playing over the vehicle's audio
system.

Play Mode

When switched to UCI mode, the iPod
external USB device automatically starts Play
mode. In Play mode, the following buttons on
the radio faceplate may be used to control the
iPod or external USB device and display data:
• Use the TUNE control knob to select the next
or previous track.
• Turning it clockwise (forward) by one
click, while playing a track, skips to the
next track or press VR button and say
Next Track .
• Turning it counterclockwise (backward)
by one click, will jump to the previous
track in the list or press VR button and say
Previous Track
• Jump backward in the current track by
pressing and holding the << RW button.
182
Holding the << RW button long enough
will jump to the beginning of the current
track.
• Jump forward in the current track by press-
ing and holding the FF >> button.
• A single press backward << RW or forward
FF >> will jump backward or forward re-
or
spectively, for five seconds.
• Use the << SEEK and SEEK >> buttons to
jump to the previous or next track. Pressing
the SEEK >> button during play mode will
jump to the next track in the list, or can press
VR button and say Next or Previous Track .
• While a track is playing, press the INFO
button to see the associated metadata (art-
ist, track title, album, etc.) for that track.
Pressing the INFO button again jumps to the
next screen of data for that track. Once all
screens have been viewed, the last INFO
button press will go back to the play mode
screen on the radio.
• Pressing the REPEAT button will change the
audio device mode to repeat the current
playing track or press the VR button and say
Repeat ON or Repeat Off .
• Press the SCAN button to use UCI device
scan mode, which will play the first 10 sec-
onds of each track in the current list and then
forward to the next song. To stop SCAN
mode and start playing the desired track,
when it is playing the track, press the SCAN
button again. During Scan mode, pressing
the << SEEK and SEEK >> buttons will
select the previous and next tracks.
• RND button (available on sales code RES
radio only): Pressing this button toggles be-
tween Shuffle ON and Shuffle OFF modes for
the iPod or external USB device, or press
VR button and say Shuffle ON or Shuffle
Off . If the RND icon is showing on the radio
display, then the shuffle mode is ON.

List Or Browse Mode

During Play mode, pressing any of the buttons
described below, will bring up List mode. List
mode enables scrolling through the list of
menus and tracks on the audio device.