Adaptive Cruise Control (Acc) Menu - Jeep Grand Cherokee WK2 Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 124 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 2B842D11
/chry_pdm/chrysler/owners/grc/og
The maximum braking applied by ACC is lim-
ited; however, the driver can always apply the
brakes manually, if necessary.
NOTE:
The brake lights will illuminate whenever the
ACC system applies the brakes.
A Proximity Warning will alert the driver if ACC
predicts that its maximum braking level is not
sufficient to maintain the set distance. If this
occurs, a visual alert "BRAKE" will flash in the
EVIC and a chime will sound while ACC con-
tinues to apply its maximum braking capacity.
When this occurs, you should immediately ap-
ply the brakes as needed to maintain a safe
distance from the vehicle ahead.
122
art=032435496.tif NO TRANS
Brake Alert

Adaptive Cruise Control (ACC) Menu

The EVIC displays the current ACC system
settings. The EVIC is located in the upper part
of the instrument cluster between the speed-
ometer and the tachometer. The information it
displays depends on ACC system status.
Menu Button
art=032400163.tif NO TRANS
Press the MENU button (located
on the steering wheel) repeatedly
until one of the following displays
in the EVIC:
Adaptive Cruise Control Off
− When ACC is deactivated, the display will
read "Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
− When ACC is activated but the vehicle
speed setting has not been selected, the
display will read "Adaptive Cruise Control
Ready."
ACC SET
− When ACC is set, the set speed will
display.
The set speed will continue to display in
place of the odometer reading when
changing the EVIC display while ACC is
set.