Using This Feature; Controlling The Ipod Or External Usb Device Using Radio Buttons; Play Mode - Jeep Compass Operating Information Manual

Hide thumbs Also See for Compass:
Table of Contents

Advertisement

AUX/USB Connector Ports
Once the audio device is connected and syn-
chronized to the vehicle's AUX/USB/MP3 con-
trol system (iPod or external USB device may
take a few minutes to connect), the audio device
starts charging and is ready for use by pushing
radio switches, as described below.
NOTE:
If the audio device battery is completely
discharged, it may not communicate with the
AUX/USB/MP3 control system until a mini-
mum charge is attained. Leaving the audio
device connected to the AUX/USB/MP3 con-
trol system may charge it to the required
level.

Using This Feature

By using an external USB device to connect to
the USB port:
• The audio device can be played on the vehi-
cle's sound system, providing metadata (art-
ist, track title, album, etc.) information on the
radio display.
• The audio device can be controlled using the
radio buttons to Play, Browse, and List the
iPod contents.
• The audio device battery charges when
plugged into the USB connector (if supported
by the specific audio device).
Controlling The iPod Or External
USB Device Using Radio Buttons
To enter the AUX/USB/MP3 control mode and
access a connected audio device, either push
the "AUX" button on the radio faceplate or push
the VR button and say "USB" or "Switch to
USB." Once in the AUX/USB/MP3 control mode,
audio tracks (if available from audio device) start
playing over the vehicle's audio system.

Play Mode

When switched to AUX/USB/MP3 control mode,
the iPod or external USB device automatically
starts Play mode. In Play mode, the following
buttons on the radio faceplate may be used to
control the iPod or external USB device and
display data:
• Use the TUNE control knob to select the next
or previous track.
• Turning it clockwise (forward) by one
click, while playing a track, skips to the
next track or push the VR button and say
"Next Track."
• Turning it counterclockwise (backward)
by one click, will jump to the previous
track in the list or push the VR button and
say "Previous Track."
• Jump backward in the current track by push-
ing and holding the << RW button. Holding
the << RW button long enough will jump to
the beginning of the current track.
• Jump forward in the current track by pushing
and holding the FF >> button.
• A single push backward << RW or forward
FF >> will jump backward or forward respec-
tively, for five seconds.
• Use the << SEEK and SEEK >> buttons to
jump to the previous or next track. Pushing
the SEEK >> button during play mode will
jump to the next track in the list, or push the
VR button and say "Next or Previous Track."
• While a track is playing, push the INFO button
to see the associated metadata (artist, track
title, album, etc.) for that track. Pushing the
INFO button again jumps to the next screen
of data for that track. Once all screens have
been viewed, the last INFO button push will
go back to the play mode screen on the radio.
213

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents