Removing The Seat; Mounting The Seat; Removing The Air Filter Box Lid; Installing The Air Filter Box Lid - KTM 125 EXC EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.22

Removing the seat

11.23

Mounting the seat

11.24

Removing the air filter box lid

11.25

Installing the air filter box lid

–
Remove screw
above.
B00817-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower at the rear
and simultaneously push forward.
–
Make sure that the seat is correctly locked in.
B00818-01
–
Mount and tighten screw
Guideline
Remaining screws, chassis
B00817-10
–
Pull off the air filter box lid in area
B00819-10
–
Insert the air filter box lid into the rear area
B00819-11
. Lift up the seat at the rear, pull it back and then remove from
1
of the seat fixation.
1
sideways and remove it toward the front.
A
M6 10 Nm (7.4 lbf ft)
and clip it into the front area
A
58
.
B