Setting The Clock; Querying Lap Time - KTM 125 EXC EU Owner's Manual

6 CONTROLS
6.14.6

Setting the clock

6.14.7

Querying lap time

Info
This function can be called up only if lap times are measured.
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu is displayed and the activated functions are shown.
–
Change to the desired function by pressing the button
The selected function flashes.
Activating a function
–
Press the button
The symbol remains on the screen and the display changes to the next
400318-01
function.
Deactivating the function
–
Press the button
The symbol on the screen goes out and the display changes to the next
function.
–
All desired functions are activated or deactivated accordingly.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
Condition
The motorcycle is stationary.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
400330-01
Info
The seconds can only be set to zero.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
Condition
The motorcycle is stationary.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
.
.
for 3 - 5 seconds.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
and the button .
for 3 - 5 seconds.
17
briefly.
.