Checking The Riding Sag Of The Shock Absorber; Adjusting The Spring Preload Of The Shock Absorber - KTM 125 EXC EU Owner's Manual

10 TUNING THE CHASSIS
10.8

Checking the riding sag of the shock absorber

10.9

Adjusting the spring preload of the shock absorber

Caution
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop
will be glad to help.)
Info
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Measure distance
–
With another person holding the motorcycle, the rider, wearing full protective cloth-
ing, sits on the seat in a normal sitting position (feet on footrests) and bounces up
and down a few times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear axle and the fixed
point.
–
Note down the value as dimension
Info
The riding sag is the difference between measurements
–
Check the riding sag.
Guideline
(All 125/200 models)
Riding sag
(All 250/300 models)
Riding sag
» If the riding sag differs from the specified measurement:
400990-10
–
Adjust the riding sag.
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Loosen screw
–
Turn adjusting ring
Hook wrench (T106S)
–
Measure the overall spring length when not under tension.
–
Tighten the spring by turning adjusting ring
Guideline
(All 125/200 models)
Spring preload
Comfort
Standard
Sport
(All 250/300 models)
Spring preload
Comfort
Standard
Sport
401026-10
of the unloaded rear wheel. (
A
.
C
( p. 41)
x
x
( p. 56)
x
.
1
until the spring is no longer under tension.
2
p. 39)
and
A C
105... 115 mm (4.13... 4.53 in)
105... 115 mm (4.13... 4.53 in)
p. 46)
to measurement .
2 A
6 mm (0.24 in)
6 mm (0.24 in)
6 mm (0.24 in)
7 mm (0.28 in)
7 mm (0.28 in)
7 mm (0.28 in)
40
.