Display Mode Speed/Lap (Lap Time); Display Mode Speed/Odo (Odometer); Display Mode Speed/Tr1 (Trip Master 1); Display Mode Speed/Tr2 (Trip Master 2) - KTM 125 EXC EU Owner's Manual

6 CONTROLS

6.14.11 Display mode SPEED/LAP (lap time)

6.14.12 Display mode SPEED/ODO (odometer)

6.14.13 Display mode SPEED/TR1 (trip master 1)

6.14.14 Display mode SPEED/TR2 (trip master 2)

–
Press the button
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues after you press the button
already occupied.
Lap 10 must be timed with the button
Press the button
400320-01
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
the display.
The total distance traveled is displayed in the ODO display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
400317-01 briefly.
–
Press the button
display.
TR1 (trip master 1) runs constantly and counts to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
400323-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
TR2 (trip master 2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button
very practical function when riding using the road book.
Info
The TR2 value can also be corrected manually during the journey with the but-
ton
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
400324-01
Press the button
briefly and repeatedly until LAP appears at the bottom right of
. Starts or stops the clock.
. Stops the current lap time and saves it, and the stop watch
starts the next lap.
The stop watch and the lap time are reset.
Next display mode
briefly and repeatedly until ODO appears at the bottom right of
. No function
. No function
–
Next display mode
briefly and repeatedly until TR1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
Next display mode
briefly and repeatedly until TR2 appears at the top right of the
and the button .
. Increases value of TR2.
, 9 memory locations are
.
and the button
19
. This is a