How To Assign Accounts To An Operator - Neopost IS-460 User Manual

Assigning Accounts to Operators
You can define the Accounts Access to each operator, by assigning accounts, groups or
subgroups of accounts to the operator.
Assigning a group (or subgroup) automatically assigns all the accounts of the group.
5

How to Assign Accounts to an Operator

To create/change the list of Accounts an Operator has access to:
1. Follow the procedure
modify screen, and select Account list .
The Account List screen is displayed.
2. Select Add Account / Group .
The Account list screen is displayed.
3. You can allocate entire groups or subgroups to the operator: select the group and
press [OK] (Enable/Disable ). Repeat until all accounts to be assigned are checked
4.
Press
5. Press [OK] to accept the changes.
116
If you assign a group (or subgroup) to an operator, all accounts you
will add afterwards to the group will be automatically assigned to
the operator.
On user screens, only accounts are displayed.
Groups and subgroups are only visible to the supervisor.
How to Modify an Existing Operator
to return to the Edit / modify screen.
on page 115 until the Edit