Maxi Dot Display (Information Display) - Skoda Fabia Owner's Manual

Skoda fabia
Hide thumbs Also See for Fabia:
Table of Contents

Advertisement

22
Instruments and warning lights
Warning against excessive speeds*
This function enables you to set a speed limit, e.g. if you drive in town. A text in the
display is intended to draw your attention to the fact that you have exceeded the set
speed limit.
Warning against excessive speeds
– Select the menu point Speed warning --- km/h..
– Drive e.°g at a speed of 50 km/h.
A
 fig.
– Press button
20. Speed warning 50 km/h is displayed in the informa-
B
tion display*. You can increase or reduce this value with the aid of the button
– After repeated pressing of the button
After pressing again, the value is erased and --- is shown in the information display*.
You can set the desired speed in steps of 5 km/h by pressing the button
the vehicle is stationary. Confirm the set speed by pressing the button
If you now exceed the set speed limit, Speed 50 km/h exceeded will be shown on the
display. This text is shown until you lower the speed below the set limit or you switch
off the displayed text with the button
An audible signal sounds as an additional warning signal.
The set speed limit remains stored even after switching off the ignition.
Fig. 20 Multi-functional indicator:
Control elements
A
, the value is stored.
B
A
, even when
A
A
.
B
A
 fig.
20.
B

MAXI DOT display (information display)*

Introduction
The information display provides you with information in a convenient way
concerning the current operating state of your vehicle. The information system also
provides you with data (depending on the equipment installed in the vehicle) relating
to the radio, mobile phone, multi-functional indicator, navigation system, the unit
connected to the MDI input and the automatic gearbox.
Certain functions and operating conditions are always being checked on the vehicle
when the ignition is switched on and also while driving.
Functional faults, if required repair work and other information are indicated by red
symbols  page 24 and yellow symbols  page 24.
Lighting up of certain symbols is combined with an acoustic warning signal.
Information and texts giving warnings are also shown in the display  page 26.
The display of text is possible in the following languages:
Czech, English, German, French, Italian, Spanish, Portuguese, Russian and Chinese.
You can select the desired language in the setting menu.
A
The following information can be shown in the display (depending on the equipment
.
A
installed on the vehicle):
Main menu
Door, luggage compartment door and bonnet ajar warn-
ing
Service Interval Display
Selector lever position for an automatic gearbox
 page 23
 page 23
 page 17
 page 99

Advertisement

Table of Contents
loading

Table of Contents