Multi-Functional Indicator (Onboard Computer) - Skoda Fabia Owner's Manual

In order to minimise the fuel consumption, a recommendation for shifting into
another gear is indicated in the display.
If the control unit recognises that it is appropriate to change the gear, an arrow
shown in the display. The arrow points up or down, depending on whether it is recom-
mended to shift into a higher or lower gear.
At the same time, the recommended gear is indicated instead of the currently engaged
A
gear .
A

Multi-functional indicator (onboard computer)*

Introduction
The multi-functional indicator appears in the display
display  page 22 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information:
The outside temperature
Driving time
Current fuel consumption
Average fuel consumption
Range
Distance driven
Average speed
Current speed*
Warning against excessive speeds*
On vehicles which are fitted out with information display*, it is possible to switch off
the display of some information.
Note

In certain national versions the displays appear in the Imperial system of measures.
Using the system Safety
A
is
B
 fig. 18
or in the information
 page 20
 page 20
 page 21
 page 21
 page 21
 page 21
 page 21
 page 21
 page 22
Driving Tips General Maintenance

If the display of the second speed is activated in mph, the current speed* is not
indicated in km/h on the display.
Memory
The multi-functional indicator is equipped with two automatic memories. The
selected memory is displayed in the middle of the display field
The data of the single-trip memory (memory 1) is shown if a 1 appears in the display.
A 2 shown in the display means that data relates to the total distance memory
(memory 2).
Switching over the memory takes place with the button
windshield wiper lever.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ignition
is switched on until it is switched off. New data will also flow into the calculation of the
current driving information if the trip is continued within 2 hours after switching off
the ignition. The memory will be is automatically erased, on the other hand, if the trip
is interrupted for more than 2 hours.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual jour-
neys up to a total of 19 hours and 59 minutes driving or 1.999 kilometres driven and
on vehicles which are fitted with information display* up to a total of 99 hours and 59
minutes driving or 9.999 kilometres driven. The memory is deleted when either of
these limits is reached and the calculation starts from anew.
Breakdown assistance
Instruments and warning lights
Fig. 18 Multi-functional indicator
 fig.
18.
A  page 20, fig. 19
on the
B
Technical Data
19