202
Fuses and light bulbs
A
– Remove the protective cap
1
– Turn the connector with the light bulb up to the stop towards the left
fig. 169
and remove.
– Replace the halogen lamp H7, insert the connector with the new halogen lamp and
turn to the right up to the stop.
– Insert the protective cap.
– We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.
Main beam (halogen projector headlights)
– Open the bonnet.
A
– Remove the protective cap
2
– Turn the connector with the light bulb up to the stop towards the left
remove.
– Replace the halogen lamp H7, insert the connector with the new halogen lamp and
turn to the right up to the stop.
– Insert the protective cap.
– We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.
page 201, fig. 167
on the right.
Fig. 170 Removing the light bulb for the
main beam light
page 201, fig. 167
on the right.
fig. 170
Turn signal light (at the front)
page 201,
– Open the bonnet.
– Turn the socket
(halogen projector headlight) to the left and take it out together with the light bulb
for the turn signal light.
– Replace the defective light bulb.
– Insert the lamp holder with light bulb into the headlight. Secure the lamp holder by
turning it to the right until it locks in place.
Parking light at the front
– Open the bonnet.
– Remove the protective cap
page 201, fig.
light)
– Grasp the light bulb holder and pull it out of the headlight.
– Replace the light bulb in the light bulb holder and re-insert into the headlight.
Daylight driving lights and fog lights
and
Fig. 171 Front bumper: Protective grille / removing the fog light
– Switch the ignition and all lights off.
– Grasp the grille at the points marked with the arrows
A
page 201, fig. 167
(halogen headlight)
B
A
(halogen headlight) or
A
167.
fig. 171
A
or the socket
3
A
(halogen projector head-
2
- left and take it out.