Skoda Fabia Owner's Manual page 21

20 Instruments and warning lights
The total-trip memory will not, contrary to the single-trip memory, be deleted after a
period of interruption of driving of 2 hours.
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is
disconnected.
Using the system
A
The rocker switch and the button
A
 fig.
19.
Selecting the memory
– Short-term pressing of the button
the desired memory.
Selecting the functions
– Press the top or bottom rocker switch
call up in sequence the individual functions of the multi-functional indicator.
Setting function to zero
– Select the memory you want.
A
– Press button for more than 1 second.
B
The following readouts of the selected memory will be set to zero by button
Fig. 19 Multi-functional indicator:
Control elements
A
are located on the windshield wiper lever
B
A
on the windshield wiper lever allows to select
B
A
for longer than 0.5 seconds. In this way,
A

average fuel consumption;

distance driven;

average speed;

driving time.
You can only operate the multi-functional indicator when the ignition is switched on.
After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4°C, a snow flake symbol (warning signal for
ice on the road) appears in front of the temperature indicator and flashes for 10
seconds, then remains displayed together with the outside temperature. At the same
time an audible signal sounds. After pressing the rocker switch
 fig.
wiper lever 19, the function which was shown last is indicated.
WARNING
Do not only rely upon the information given on the outside temperature display
that there is no ice on the road. Please note that black ice may also be present
on the road surface even at temperatures around +4°C - warning, drive with
care!
Driving time
The driving time which has elapsed since the memory was last erased, appears in the
display  page 19. If you wish to calculate the driving time from a particular time of
day you must first erase the memory at this moment in time by pressing the button
 fig.
19.
The maximum time indicated in both memories is 19 hours and 59 minutes and on
vehicles which are fitted with information display*, it is 99 hours and 59 minutes. The
indicator is set back to null if this period is exceeded.
A
:
B
A
on the windshield
A
A
B