Voice Control - Skoda Fabia Owner's Manual

110 Communication

Voice control

Dialogue
The period, in which the telephone system is ready to receive voice commands and
carry out the voice commands, is called DIALOGUE. The system gives audible feedback
and guides you if necessary through the relevant functions.
You can end the dialogue at any time by pressing the PTT button
 page 108, fig. 106
or on the multifunction steering wheel* (press for a long period
of time to start or briefly press to end)  page 108 or end it with the voice command
CANCEL.
When receiving an incoming call, the dialogue is immediately interrupted and you can
accept the call by pressing the button
pressing the button for receiving a call directly on your telephone.
If a voice command is not detected, the system answers with "Sorry?" and a new entry
can be performed. After the 2nd error the system repeats the aid. After the 3rd error
the answer "Cancel" is given and the dialogue is ended.
Optimum understanding of the voice commands depends on the following
factors:

Speak with a normal tone of voice without intonation and excessive voice pauses.

Avoid insufficient articulation.

Close the doors, windows and sliding roof, in order to reduce or stop disturbing
exterior noise.

It is recommended to speak louder at higher speeds, so that the tone of your voice
is louder than the increased surrounding noise.

During the dialogue avoid additional noise in the vehicle, e.g. simultaneously
talking occupants.

Do not speak, if the system makes an announcement.

The microphone for voice control is directed to the driver. Therefore, the device
may respond less well to commands of the front passenger.
 on the adapter*
 on the multifunction steering wheel* or by
Voice commands
The voice control is possible in the following languages:
Czech, English, German, French, Italian, Spanish, Russian and Portuguese.
Voice commands for operating the telephone control unit
Voice command
After this command the system repeats all possible
HELP
commands.
With this command you call up the contact from the
CALL XYZ
phone book  page 110.
After this command a phone number can be entered
DIAL NUMBER
which establishes a connection to the requested party.
After this command the system selects the last selected
REDIAL
number.
Play music from the mobile phone or another paired
MUSIC
device.
OTHER OPTIONS
Selection for setting Bluetooth
CANCEL The dialogue is ended.
After giving the command DIAL NUMBER, the system requests the entry of a tele-
phone number. The telephone number can be entered as an interconnected spoken
row of digits (complete number), in the form of order of digits (separation through a
brief voice pause) or through individually spoken digits. After each order of digits
(separation through brief voice pause) all of the digits detected up to now are repeated
by the system.
The digits 0 - 9, symbols +,  , # are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
Call name
– Press the PTT button.
Action
®
, dialogue etc.