Software Lock Mode Selection (Set); Force Operation Ope Function (Ope) - Hyundai hiRUN N300 Series Instruction Manual

N300 INSTRUCTION MANUAL

Software lock mode selection (SET)

This function is used to prevent changing data by mistake.
When you want to use an intellignent input terminal, assign 15(SFT).
Below is the software lock code selection.
Data
Function code
00
01
b031
02
03
10

Force operation ope function (OPE)

This function is used to operate from the operator forcibly by
on/off of an intelligent terminal when frequency and operation
command is selected other than the operator.
Becoming the operation from the frequency and operation
command that was selected by A001 and A002 if the signal is off, and becoming the frequency and operation
command from an operator forcibly if the signal is on when the compulsion operation function is selected by an
intelligent input selection.
When changed the operation command while driving, operation command is canceled and become stoppage
at first.
Operation command from each command input the operation command once again as the stoppage at first for
driving once again.
Set item
Frequency setting selection
Operation command selection
Intelligent input selection
SFT
terminal
Write disable except for b031/write enable
ON/OFF
Write disable except for b031, F001, A020, A220, A320
ON/OFF
-
Write disable except for b031
-
Write disable except for b031, F001, A020, A220, A320,A021-A035,A038
-
Write disable except for change mode during runnuing (code list reference)
Function cord
A001
A002
C001-C008
Chapter 4 Explanation of function
Description
A021-A035,A038/write enable
Setting value
01
02
03
04
05
01
02
03
04
05
31
Relation code
b031 : Software lock mode selection
C001-C008 : Intelligent input terminal
Relation code
A001 : Frequency setting selection
A002 : Operation command selection
C001-C008 : Intelligent input terminal
Contents
Terminal
Operator
RS485
Option 1
Option 2
Terminal
Operator
RS485
Option 1
Option 2
OPE : Compulsion operation