Application Method Of J61 Connector; Important Items When Applying J61 Connector Pin - Hyundai hiRUN N300 Series Instruction Manual

N300 INSTRUCTION MANUAL
c) 30KW ~ 132KW Inverter Capacity (the same location as 200V Supply & 400V Supply)

(2) Application Method of J61 Connector

Sequencing of Application
You should turn off the power, after halting Inverter working.
You should open the Inverter cover located in the bottom level. At this very moment, you should
use Meta and confirm if DC voltage between P and N is completely discharged.
As J61 is in a different location according to Inverter capacity, you should confirm if J61 is in the
right location. For J61 Connector Pin, 5.5KW~22KW Inverter capacity is located in the bottom
right of IGBT PCB and 30KW~132KW Inverter capacity is in the bottom right of Ro-To PCB.
After checking out its location, you should connect Jump line(ending line) to J61 connector.
You should close the bottom cover after application.
You should operate the machine after turning on the Inverter power.

(3) Important items when applying J61 Connector Pin

You should decide if you use J61 Connector Pin for Inverter before applying panel.
If using J61 Connector on the purpose of protection for lightning, you should halt Inverter
working, turn off the power, and connect to it.
You may have an electric shock.
Also, You should apply J61 Connector pin, after checking out if DC voltage between P and N is
completely discharged by using Meta.
After application, you should turn on the power after closing the Inverter cover.
You may have an electric shock.
If you have any inquiries about J 61 Connector, please contact our company.
Chapter 1 General Descriptions
Location of J61