Acceleration And Deceleration Pattern; Selection Of Pattern; The Curve Constant (The Swelling Degree) - Hyundai hiRUN N300 Series Instruction Manual

N300 INSTRUCTION MANUAL

Acceleration and deceleration pattern

(1) Selection of pattern

Pattern of acceleration and deceleration speed is
possible to set up corresponding to each system.
Select the pattern of acceleration and deceleration
with A097 and A098.
set value
curve
A097
(Accel-
eration)
A098
(Decel-
eration)
Accelerate and
decelerate in line
Contents
frequency set value
It is possible to set the pattern of both acceleration, deceleration

(2) The curve constant (the swelling degree)

It makes the rough sketch reference and please decide the swelling degree.
Output frequency(Hz)
Goal frequency
(100%)
96.9
82.4
17.6
3.1
There is the range which the midway adjustable-speed time becomse fast in the S character parrtern.
When An intelligent input terminal is allocated to LAD cancel (LAC) and the terminal is ON, output frequency
is immediately controlled by Setup frequency.
00
Line
time
time
Collapsing the cargo such
as the going up and
down machine, conveyor
it uses it for prevention
Output frequency(Hz)
Goal frequency
(100%)
99.6
10 02
93.8
87.5
68.4
64.6
02
10
time
25 50 75
Acceleration time to
output frequency
set value(100%)
Chapter 4 Explanation of function
01
Sigmoid
time
time
Cutting the tension control, rolled book such as
the volume collector machine it uses it for
prevention
Goal frequency
10
02
35
10
25 50 75
Acceleration time to
output frequency
set value(100%)
Relation code
A097 : Acceleration pattern selection
A098 : Deceleration pattern selection
A131 : Acceleration curve constant
A132 : Deceleration curve constant
02 03
U-shape Reverse U-shape
time
time
Output frequency(Hz)
(100%)
65
35.4
31.6
12.5
6.25
0.39
25 50
time
time
02
10
75
Acceleration time to
output frequency
set value(100%)